Akrapovic Slip-On Exhaust System for the Husqvarna TC 250 (05-06)
For recreational riders of the Husqvarna TC 250, we have developed an Akrapovic SLIP-ON system which will satisfy their basic exhaust system tuning requirements and offer an appropriate performance increase. The system comes with an FIM noise damper installed.
- Power
- +1.2HPat 12140 rpm
- Weight
- -0.12kg
PERFORMANCE
Measurements of the Akrapovic SLIP-ON system on the HUSQVARNA TC 250:
Power & Torque: basic level tuning will not result in extreme performance increases, but with respect to the size of the engine the Akrapovic Slip-On system still manages to offer an improvement, which is oriented mainly towards the low end of the range and the top end and the overrev range. The improvement in the torque curve is similar.
Performance | |||
|---|---|---|---|
stock |
AKRAPOVIC |
max. increased power | |
| max. rear wheel power HP / rpm (measured on SuperFlow Cyle Dyn) |
32.2 / 11080 | 33 / 12140 | 1.2 / 12140 |
CONFIGURATION
The Akrapovic Slip-On for the TC 250 is composed of a muffler welded to a short cylindrical titanium link pipe. The muffler is made entirely of titanium (outer sleeve, inlet and outlet cap and inner perforation). The system is attached to the stock header assembly with a sleeve joint held together with a silicon-shielded spring. The muffler is attached to the frame with two Akrapovic carbon-fiber clamps. The muffler also has a built-in noise damper.
heat shield
CONFIGURATION | |||
|---|---|---|---|
header tubes |
collector |
link pipe | |
material |
- | - | TITANIUM |
tube shape |
- | - | CYLINDRICAL |
interference crossover tubes |
- |
lambda sensor |
- |
header tube inner sleeves |
- |
header tube flanges |
- |
header tube - collector connection |
- |
collector / header tube - link pipe connection |
SLEEVE JOINT + SILICON SHIELDED SPRINGS |
link pipe - muffler connection |
WELDED |
muffler
|
TITANIUM / TITANIUM |
muffler metal interior |
TITANIIUM |
muffler outer sleeve |
TITANIIUM |
muffler clamp |
CARBON-FIBER OFF ROAD CARBON-FIBER ROAD |
muffler bracket |
- |
muffler insert |
FIM noise damper | - | |
ADDITIONAL DATA | |||
|---|---|---|---|
weight comparison (kg) |
stock |
AKRAPOVIC |
difference |
| 2.05 | 1.93 | 0.12 | |
noise measurements (dB / rpm) |
stock |
AKRAPOVIC |
|
| 98 / 5000 | 98 / 5000 | ||
possibility of periodic service without removing A.E.S. |
oil |
oil filter |
|
| YES | YES | ||
legal for street use |
NO | ||
** Technical specifications of Akrapovic exhaust systems and related products subject to change without notice
Below you may see the diagram data dislaying the difference in Engine Torque and WH Power between stock and Akrapovic Slip-On Exhaust System for the Husqvarna TC 250 (05-06)
